HIGH DRUM LEVEL ALARM
The DRUM ALARM for HIGH LEVEL alerts your attention to full drums with a bright flashing LED and a loud beeper when liquid level is high. Just drop it in a drum and you'll never overfill again!
 |
The cap fits all containers
Better Level Control * Always on duty because the liquid discharge tube is permanently attached to the alarm unit. * It can go anywhere because its battery powered. No need for power outlets. * Lithium batteries last for years. (included) * Loud 103dB warbling tone cuts through the loudest industrial noise. * Rugged. Built for rough, wet and corrosive environments. NEMA 4X. * Transfer to a new drum is easy: no need to screw in threads or fiddle around with tube connections, just drop it in. * Easy to check that its working: simply lift it out of the drum. * Reliable. Float is protected in a pipe and with a debris screen. * Safe. 9 volt circuit in a waterproof enclosure. |
The foolproof level alarm for filling chemical drums and containers without overfilling. Simply connect your feed line and drop it in a drum. The Drum Alarm will alert you with a loud beeping and flashing when liquid is within 1 inch of the top.
The one-size-fits-all cap makes it easy to switch to a new drum since you don't have to unscrew it, and therefore you don't have to disconnect tubing every time. And because its own wieght keeps it down, the Drum Alarm cap supresses vapors. Even ammonia drums are not a problem. Nevertheless there is an option for a threaded plug if desired.
The feed tube can't be separated from the electronic alarm so the level alarm is always on duty.
The Drum Alarm is resistant to most chemicals with its polypropylene float and PVC construction. For certain chemicals an all-polypropylene version is available.
 |
HL-2 has a threaded Pipe Plug
Battery power or plug-in?
You might be surprised by the battery life. Typically, batteries will last for 3 years as there is no passive power consumption as with other methods of monitoring. Furthermore, battery power is uninterruptible. Nevertheless there is an option to run it from a 9 or 12V AC wall adapter if desired, free for the asking.
 |
Battery Powered
The float is protected inside a pipe and with a screen for years of reliable service.
Some Chemicals Commonly Used With Drum Alarms * Aqueous Ammonia |
There is intentionally no audio alarm shut-off switch so that the operator must transfer to a new drum immediately. If needed however, there is an option for a "touch-to-silence" alarm that allows it to be silenced while the LED continues to blink as a reminder. Everything resets automatically when the level is corrected.
 |
Touch-to-silence alarm
An optional relay output with piggyback plug allows the Drum Alarm to control pumps and solenoids. Available in 8A or 16A rating.
 |
Relay output with piggyback plug
 |
VICTORIA OFFICE: P: 0419 009 097 E: jorge@alytech.com.au |